Timken HJ-202820,2RS needle roller bearings

Basic static load rating C0:800 kN; Limiting speed:3200 r/min; b:10 mm; 2B:76 mm; Basic dynamic load rating C:561 kN; Ca min.:6 mm; Calculation factor e:0.43; Calculation factor Y1:1.6; r5 min.:1 mm; Reference speed:2000 r/min;

B:14.00 mm; D:47.0000 mm; Grease Speed Rating Open/Shielded n1:12000 rpm; Accessories:One Shield & Snap-Ri; Fillet Radius ra:1.00 mm; Oil Speed Rating Open/Shielded n2:15000 rpm; Basic Dynamic Radial Load Rating C:12500 N; d:20.000 mm; Basic Static Radial Load Rating Co:8300 N;

Oil Speed Rating n2:4800 rpm; d:65.000 mm; Grease Speed Rating n1:3600 rpm; D:120.0000 mm; Fillet Radius rb:1.00 mm; Fillet Radius ra:1.50 mm; Basic Dynamic Radial Load Rating C:104000 N; B:46.00 mm; Basic Static Radial Load Rating Co:100000 N;

Sealed Speed Rating n3:0 rpm; d:240.000 mm; Oil Speed Rating Open/Shielded n2:2200 rpm; Accessories:Two Shields; D:300.0000 mm; B:28.00 mm; Fillet Radius ra:2.00 mm; Basic Dynamic Radial Load Rating C:108000 N; Grease Speed Rating Open/Shielded n1:1800 rpm; Basic Static Radial Load Rating Co:140000

Basic Static Radial Load Rating Co:34500 N; Grease Speed Rating n1:5600 rpm; d:35.000 mm; Basic Dynamic Radial Load Rating C:49400 N; Oil Speed Rating n2:7500 rpm; B:38.10 mm; D:80.0000 mm; Accessories:No Shield, no Seal; Fillet Radius ra:1.50 mm; Sealed Speed Rating n3:5600 rpm;

Grease Speed Rating n1:9000 rpm; Grease Speed Rating Open/Shielded n1:9000 rpm; D:72.0000 mm; Oil Speed Rating Open/Shielded n2:11000 rpm; Sealed Speed Rating n3:6300 rpm; d:30.000 mm; Fillet Radius ra:1.00 mm; Oil Speed Rating n2:11000 rpm; Basic Static Radial Load Rating Co:16000 N; Accessories:On

D:120.0000 mm; Fillet Radius ra:1.50 mm; Grease Speed Rating Open/Shielded n1:4300 rpm; d:65.000 mm; B:23.00 mm; Basic Dynamic Radial Load Rating C:69300 N; Oil Speed Rating Open/Shielded n2:5300 rpm; Basic Static Radial Load Rating Co:65500 N; Accessories:Two Shields & Snap-R;

N:12.3 mm; B:31 mm; s1:18.3 mm; End cover:ECW 204; Fatigue load limit Pu:0.28 kN; J:90 mm; Recommended diameter for attachment bolts, inch G:0.375 in; Thread grub screw G2:1/4-28 UNF; T:37.3 mm; A:29.5 mm;

Fillet Radius rb:1.00 mm; Grease Speed Rating n1:4200 rpm; Basic Dynamic Radial Load Rating C:138000 N; B:58.00 mm; Oil Speed Rating n2:5500 rpm; Basic Static Radial Load Rating Co:114000 N; d:45.000 mm; D:120.0000 mm; Fillet Radius ra:2.00 mm;

Mass adapter sleeve assembly:0.16 kg; Lock nut:KM 7; Locking device:MB 7; B4:9 mm; B:8 mm; d1:30.163 mm; d:35 mm; B1:43 mm; G:M 35x1.5; d3:52 mm;

Cb min.:5.5 mm; Reference speed:5600 r/min; Da min.:81 mm; B:23 mm; C:17.5 mm; Dimension series:3CC; Calculation factor e:0.4; d1 ≈:73.3 mm; D:90 mm; da max.:63 mm;

Limiting speed:26000 r/min; Mass needle roller and cage assembly:0.0055 kg; U:10 mm; Basic static load rating C0:10.8 kN; Reference speed:22000 r/min; Basic dynamic load rating C:7.81 kN; Fw:17 mm; Fatigue load limit Pu:1.22 kN; Ew:21 mm;

Preload class D GD:1360 N; Static axial stiffness, preload class D:309 N/µm; Static axial stiffness, preload class A:132 N/µm; Basic dynamic load rating C:27.6 kN; db min.:49.6 mm; rb max.:0.3 mm; B:16 mm; Calculation factor (back-to-back, face-to-face) Y1:0.92; Fatigue load limit Pu:0.9

A2:250.825 mm; P180°:89 kN; Bearing:23236 CCK/W33; Da:319.999 mm; Cap bolt, SAE grade:5; L:679.45 mm; PosiTrac Plus contact element:2 x B10724-148; J max.:600.075 mm; Cap bolt recommended tightening torque:203.4 N·m; PG:1/4 NPT;

b:3.9 mm; d:35 mm; Da min.:48.5 mm; r2 min.:1 mm; Basic static load rating C0:400 kN; M:2.5 mm; Specific dynamic load factor K:100 N/mm²; α:6 °; Specific static load factor K0:500 N/mm²; d1 ≈:40 mm;